Hovedemner

Komité: CEN/TC 165 (Waste water engineering)
Opprinnelse:
Sluttdato: 16. jul 2020
Vis merVis mindre
 
This document is applicable to the trenchless construction, trenchless replacement techniques and testing of new drains and new sewers in the ground usually operating as gravity or pressure pipelines, formed using prefabricated pipes and their joints. Renovation techniques for existing pressure and non-pressure systems are not covered by this document. Methods of trenchless construction include: - manned and unmanned techniques; - steerable and non-steerable techniques. Mining or tunnelling (e.g. in situ construction or the use of prefabricated segments) are not covered by this document although some parts may apply to these methods. Requirements for associated pipeline installation work other than trenchless construction, e.g. for manholes and inspection chambers, are not covered by this document and are specified in EN 1610. This also applies to pipes that are subsequently installed within entry and exit shafts/pits.
Emner: Naturgass
Komité: CEN/TC 238 (Test gases, test pressures, appliance categories and gas appliance types)
Opprinnelse:
Sluttdato: 16. jul 2020
Vis merVis mindre
 
A method to calculate viscosity and other properties, excluding density, for use in the metering of natural gas flow
Komité: CEN/TC 55 (Dentistry)
Opprinnelse:
Sluttdato: 16. jul 2020
Vis merVis mindre
 
Emner: Brannvern
Komité: CEN/TC 70 (Manual means of fire fighting equipment)
Opprinnelse:
Sluttdato: 16. jul 2020
Vis merVis mindre
 
This European Standard specifies the rules of design, type testing, fabrication and inspection control of portable fire extinguishers manufactured with metallic bodies as far as pressure risk is concerned. This part applies to portable fire extinguishers of which the maximum allowable pressure PS is lower than or equal to 30 bar and containing non-explosive, non-flammable, non-toxic and non-oxidising fluids. This European Standard also applies to the metallic gas cartridge of a volume less than 0,12 l (see Annex E) and gives guidance for sound engineering practice for metallic gas cartridges equal to or greater than 0,12 l and less than 0,5 l, see Annex F. This European Standard does not apply to carbon dioxide fire extinguishers. NOTE Annex A gives the classification of the different parts forming the portable fire extinguisher.
Komité: CEN/TC 58 (Safety and control devices for burners and appliances burning gaseous or liquid fuels)
Opprinnelse:
Sluttdato: 16. jul 2020
Vis merVis mindre
 
This document specifies the safety, construction and performance requirements for manually operated taps and pre-setting taps intended for use with gas appliances and similar use, hereafter referred to as "taps". This document is applicable to taps with declared maximum inlet pressures up to and including 50 kPa (500 mbar) of nominal connection sizes up to and including DN 50 for use with one or more fuel gases in accordance with EN 437. This document is not applicable to: a) manual operated shut-off valves conforming to EN 331; b) controls which use auxiliary energy (e.g. electrical energy supplied externally); c) an assessment of the control regarding Performance Level (PL) and Safety Integrity Level (SIL).
Komité: ISO/TC 107 (Metallic and other inorganic coatings)
Opprinnelse:
Sluttdato: 16. jul 2020
Vis merVis mindre
 
Emner: Metallbelegg
Komité: ISO/TC 107 (Metallic and other inorganic coatings)
Opprinnelse:
Sluttdato: 16. jul 2020
Vis merVis mindre
 
Komité: ISO/TC 86/SC 7 (Testing and rating of commercial refrigerated display cabinets)
Opprinnelse:
Sluttdato: 16. jul 2020
Vis merVis mindre
 
Komité: CEN/TC 44 (Commercial and Professional Refrigerating Appliances and Systems, Performance and Energy Consumption)
Opprinnelse:
Sluttdato: 17. jul 2020
Vis merVis mindre
 
The scope of this European Standard is to define the classification for commercial beverage coolers and to specify their requirements and test methods. This European Standard is applicable to integral refrigeration systems. This European Standard is not applicable to remote and secondary system cabinets.
Emner: Metallbelegg
Komité: CEN/TC 262 (Metallic and other inorganic coatings, including for corrosion protection and corrosion testing of metals and alloys)
Opprinnelse:
Sluttdato: 17. jul 2020
Vis merVis mindre
 
Komité: CEN/TC 262 (Metallic and other inorganic coatings, including for corrosion protection and corrosion testing of metals and alloys)
Opprinnelse:
Sluttdato: 17. jul 2020
Vis merVis mindre
 
Komité: CEN/TC 248 (Textiles and textile products)
Opprinnelse:
Sluttdato: 20. jul 2020
Vis merVis mindre
 
N/A
Komité: ISO/TC 107 (Metallic and other inorganic coatings)
Opprinnelse:
Sluttdato: 21. jul 2020
Vis merVis mindre
 
Komité: ISO/TC 28 (Petroleum and related products, fuels and lubricants from natural or synthetic sources)
Opprinnelse:
Sluttdato: 21. jul 2020
Vis merVis mindre
 
Emner: Medikamenter
Komité: ISO/TC 249 (Traditional Chinese medicine)
Opprinnelse:
Sluttdato: 22. jul 2020
Vis merVis mindre
 
Komité: ISO/TC 23/SC 19 (Agricultural electronics)
Opprinnelse:
Sluttdato: 22. jul 2020
Vis merVis mindre
 
Komité: ISO/TC 23/SC 19 (Agricultural electronics)
Opprinnelse:
Sluttdato: 22. jul 2020
Vis merVis mindre