Varme- og lydisolerende materialer

Komité: CEN/TC 128 (Roof covering products for discontinuous laying and products for wall cladding)
Opprinnelse:
Sluttdato: 27. des 2018
Vis merVis mindre
 
This European Standard specifies requirements for factory made, self-supporting, double skin metal faced insulating sandwich panels, which are intended for discontinuous laying in the following applications: a) roofs and roof cladding; b) external walls and wall cladding; c) walls (including partitions) and ceilings within the building envelope. The insulating core materials covered by this European Standard are rigid polyurethane, expanded polystyrene, extruded polystyrene foam, phenolic foam, cellular glass and mineral wool. NOTE Polyurethane (PUR) includes polyisocyanurate (PIR). Panels with edge details that utilise different materials from the main insulating core are included in this European Standard. Panels used in cold store applications are included in this European Standard. Panels, put on the market as a component of a cold storage room, building and/or building envelope kit are covered by ETA-Guideline 021 “Cold storage premises kits”. This European Standard does not cover the following: i. sandwich panels with a declared thermal conductivity for the insulating core greater than 0,06 W/m•K at 10 °C; ii. products consisting of two or more clearly defined layers of different insulating core materials (multi-layered); iii. panels with perforated facing(s); iv. curved panels.
Komité: ISO/TC 163/SC 3 (Thermal insulation products)
Opprinnelse:
Sluttdato: 31. des 2018
Vis merVis mindre
 
Komité: CEN/TC 193 (Adhesives)
Opprinnelse:
Sluttdato: 10. jan 2019
Vis merVis mindre
 
This document specifies test methods for the evaluation of the mechanical properties for moisture curing, self-curing or water drying foams dispensed from single pressurized containers used as an insulating air sealant and adhesive for both building and non-building applications. This document does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use. The following test methods are described: - Compression strength: This test method describes how to determine the compressive strength of a cured foam. It gives an indication of the foams resistance against area distributed pressure. The maximum endurable stress is determined. - Movement capability: This test method describes how to determine the movement capability of cured foam. The result gives an indication of the degree of flexibility of the cured foam. - Bonding strength: The method displays the measurement of the bonding power of a One Component (Foam) Adhesive, dispensed from a pressurized can, between two substrates with direct contact. - Tensile strength: This test method describes how to determine the maximum stress a cured foam can withstand while being stretched before breaking. The result gives an indication of the elasticity of the cured foam. - Shear strength: This method displays the behavior of a foam system towards shear forces. It shows the strength and the bonding power of the foam as the sandwich element between wooden plates. The test is conducted according to EN 12090.
Komité: CEN/TC 88 (Thermal insulating materials and products)
Opprinnelse:
Sluttdato: 17. jan 2019
Vis merVis mindre
 
This amendment modifies EN 14306:2015 identifying those clauses of the standard which are needed for the compliance of this European Standard with the Construction Products Regulation (CPR). This amendment introduces: a) an update for the normative references; b) delete 4.3.11 Continuous glowing combustion; c) the reaction to fire classes "A1", "A2" und "F" in Annex A; d) the new Annex ZA; e) editorial changes.
Komité: CEN/TC 88 (Thermal insulating materials and products)
Opprinnelse:
Sluttdato: 17. jan 2019
Vis merVis mindre
 
This amendment modifies EN 14309:2015 identifying those clauses of the standard which are needed for the compliance of this European Standard with the Construction Products Regulation (CPR). This amendment introduces: a) an update for the normative references; b) delete 4.3.16 Continuous glowing combustion; c) the reaction to fire class "F" in Annex A; d) the new Annex ZA; e) editorial changes.
Komité: CEN/TC 88 (Thermal insulating materials and products)
Opprinnelse:
Sluttdato: 17. jan 2019
Vis merVis mindre
 
This amendment modifies EN 14313:2015 identifying those clauses of the standard which are needed for the compliance of this European Standard with the Construction Products Regulation (CPR). This amendment introduces: a) an update for the normative references; b) delete 4.3.10 Continuous glowing combustion; c) the reaction to fire classes "A1", "A2" and "F" in Annex A; d) the new Annex ZA; e) editorial changes.
Komité: CEN/TC 88 (Thermal insulating materials and products)
Opprinnelse:
Sluttdato: 17. jan 2019
Vis merVis mindre
 
This amendment modifies EN 14306:2015 identifying those clauses of the standard which are needed for the compliance of this European Standard with the Construction Products Regulation (CPR). This amendment introduces: a) an update for the normative references; b) delete 4.3.9 Continuous glowing combustion; c) the reaction to fire classes "E" and "F" in Annex A; d) the new Annex ZA; e) editorial changes.
Komité: CEN/TC 88 (Thermal insulating materials and products)
Opprinnelse:
Sluttdato: 17. jan 2019
Vis merVis mindre
 
This amendment modifies EN 14306:2015 identifying those clauses of the standard which are needed for the compliance of this European Standard with the Construction Products Regulation (CPR). This amendment introduces: a) an update for the normative references; b) delete 4.3.9 Continuous glowing combustion; c) the reaction to fire classes "A1", "A2" und "F" in Annex A; d) the new Annex ZA; e) editorial changes.
Komité: CEN/TC 88 (Thermal insulating materials and products)
Opprinnelse:
Sluttdato: 17. jan 2019
Vis merVis mindre
 
This amendment modifies EN 14305:2015 identifying those clauses of the standard which are needed for the compliance of this European Standard with the Construction Products Regulation (CPR). This amendment introduces: a) an update for the normative references; b) delete 4.3.15 Continuous glowing combustion; c) the reaction to fire class "F" in Annex A; d) the new Annex ZA; e) editorial changes.
Komité: CEN/TC 88 (Thermal insulating materials and products)
Opprinnelse:
Sluttdato: 17. jan 2019
Vis merVis mindre
 
This amendment modifies EN 14308:2015 identifying those clauses of the standard which are needed for the compliance of this European Standard with the Construction Products Regulation (CPR). This amendment introduces: a) an update for the normative references; b) delete 4.3.10 Continuous glowing combustion; c) the reaction to fire classes "A1", "A2" und "F" in Annex A; d) the new Annex ZA; e) editorial changes.
Komité: CEN/TC 88 (Thermal insulating materials and products)
Opprinnelse:
Sluttdato: 17. jan 2019
Vis merVis mindre
 
This amendment modifies EN 14304:2015 identifying those clauses of the standard which are needed for the compliance of this European Standard with the Construction Products Regulation (CPR). This amendment introduces: a) an update for the normative references; b) delete 4.3.10 Continuous glowing combustion; c) the reaction to fire classes "A1", "A2" and "F" in Annex A; d) the new Annex ZA; e) editorial changes.
Komité: CEN/TC 88 (Thermal insulating materials and products)
Opprinnelse:
Sluttdato: 17. jan 2019
Vis merVis mindre
 
This amendment modifies EN 14303:2015 identifying those clauses of the standard which are needed for the compliance of this European Standard with the Construction Products Regulation (CPR). This amendment introduces: a) an update for the normative references; b) the adaption of 4.3.10 in order to reference EN 16733 for the continuous smouldering combustion; c) the reaction to fire class "F" in Annex A; d) the new Annex ZA; e) editorial changes.
Komité: CEN/TC 88 (Thermal insulating materials and products)
Opprinnelse:
Sluttdato: 17. jan 2019
Vis merVis mindre
 
This amendment modifies EN 15501:2015 identifying those clauses of the standard which are needed for the compliance of this European Standard with the Construction Products Regulation (CPR). This amendment introduces: a) an update for the normative references; b) delete 4.3.9 Continuous glowing combustion; c) the reaction to fire classes "E" und "F" in Annex A; d) the new Annex ZA; e) editorial changes.